Recensioni dei clienti per VEVOR Sistema per produzione di birra, Dispositivo per produzione di birra bollitore in acciaio inox, Fermentatore per birra da 60 L, Fermentatore a secchio per preparazione birra

Fantastic and good quality, well worth buying . .

I used this for the first time today to make Amber Ale. I boiled up the batch in a Vevor 5 gallon brew kettle (Another Great Product, built like a Blichmann). I/m using 2 DMEs, and 2 different 1 pound grain adds to do a "mini mash" and it comes out indestinguishable from a BIAB all grain. I like the volume makings on the inside of the fermetor. They help alot and are pretty accurate. (I checked). I also checked for leaks by filling it up first. (Please do this), It was too high, so I jammed that cork/air lock all the way down so it fit in the fermentation chamber. I'm glad I put the feet on, you need to do this or it will get wobbly and leak. It's pretty solid. I run it out to the garage on a handtruck and lift it into the F.C. (top loading floor model freezer). The fermentor cools off quickly because the steel radiates the heat much better than the plastic bucket I was using. I spray star san in it, let it drip down and drain it. Then I pour the hot wort into the fermetor which helps sanitize it too. I add refrigerated water and then cools further . This is a lot quicker than using the plastic buckets . The only complaint I have is the thermometer does not allow the chiiller coils to drop all the in. I think I could get them all the way in but I would have to thread the probe through the coil and then back out again. I make 6 gallon batches so you get 5 gallons of beer at the end and then can harvest /rinse/reuse your yeast. I think the conical bottom will help maximize beer yeild and minimize the waste when harvesting yeast. Thats about it.

I used 6 gallon PET carboys before this, and this blows them out of the water. This is a great fermentation vessel! It's high quality, easy to separate the trub/yeast from the wort, easy to access clean wort for gravity readings, and has a small foot print so it fits in my freezer fermentation chamber. I'm going to get another one (if that tells you anything). Just get it :)

It works fine in beer fermentation. Air tight, working temperature meter, 2 drain valves etc. Easy to assemble.

Worked great, made a beer in it last week. im impressed. This is the most affordable stainless steel conical fermentor that I have seen on the market. plan to buy a bigger one for larger batches.

Bought one on temu , liked it so well wanted another, was out of stock on Temu, so I ordered directly from Vevor , glad I did , got here quicker and in better condition, there was one small ding on the one from Temu, the one directly from Vevor was flawless and the packaging was also in a better state, from now on, directly from Vevor, THANKS

This fermenter is amazing! It is super high quality, super top-notch! It is easy to clean, works amazingly. What more can I say? I can't believe the low price for what you get, if you are thinking about this, get it!

Well made, good value for money and concise description. Would recommend to any brewing enthusiast.

Product came in perfect shape. Filled it full of water and absolutly no leaks.(I then tightend all fittings with water still in it and still no leaks, not more tha n 1/8 turn on anything.) Welds looked ok. Wish it had a straight fitting instead of a 90° on the bottom but thats the only way with the legs so short. They mentiond leg extenton in the manual but no more. Finishing my first double batch of kolsch and in 4 days my Tilt temp and gravity told me fermentation was near completion. Trub removal could be a problem with the 90°. Overall, a good product. Dont expect a blichman or other high end product, gets the job done though.👍

Kohtalaisen tukevaa tekoa.