Recensioni dei clienti per VEVOR Serratura Meccanica Porta d'Ingresso Senza Chiave, Tastiera a 14 Cifre, Serrature per Porte Incorporate Doppia Faccia con Tastiera Maniglia Lega di Zinco Impermeabile Giardino, Cortile, Garage

This entryway pushbutton lock system works pretty good after its installed, but the assembly was nerve wrecking! The two screws that secure the two halfs together on the door are all but impossible to start and screw in. It took me one hour of sweat and cuss words to finally get it together!!!! Not for the faint at heart

The directions aren't real explanatory on how to change the passcode I had to Google it online to figure out how to change the passcode The directions in the manual suck

Two issues: (1) the lock is not tall enough to cover a pre-existing deadbolt hole. In fact, you'll need to bore a hole thru door just at the bottom of the deadbolt area. You won't be able to use a deadbolt because the lock (height) covers a portion of the deadbolt hole. (2) All locks are keyed differently. I ordered 5 locks and no two locks have same key. So I have a couple of key rings with five keys on them (each key must be labeled for its door). The locks are mechanically sound. I've been using them for a few weeks and other than the above mentioned issues, I feel they are a good value for the price.

Purchased these a little over 12 months ago, coatings coming off, one handle has fallen off rendering them unusable, these i installed on front exterior gate as security, unfortunate as would do the job if bit more robust and lasted longer for the price

Okay fro the price but not as good of quality as one from a lock smith

I recently bought 2 for each side of the house but for the way my gates are build does not work. Quality it’s okay don’t think it would last longer the. A year with the Florida weather. So I returned both

Not recommended , I purchased 2 of these gate locks 1 of which the numbers have no resistance already making it so the gate is permanently locked

I had a lot of hope for this lock since it had all the features I wanted. Unfortunately there is a design flaw that ultimately led me to return the product. The hole (on the back) where you turn the lock handle direction is small and if you use a common screwdriver bit it damages the ridges used by the flat bar. I cannot find such narrow bit that would work. This seems like a specialized tool that vevor should provide, or redesign the hole. More troubling though is the endless back and forth with the support team who promised me that 'engineering' would research and get back to me. Twice I had to contact support to find out a status. 'Engineering' never provided any response. Support didn't want to provide me a refund. Eventually I just sent the product back and asked my bank to refund me on my credit card. Cost me $20 to send it back since it was a bit heavy. Vevor did not reimburse. Sorry, this is way too much trouble for me to with this merchant in the future.

Wasted 2 hours on installing this thing. Definitely need to make installation user friendly. Very outdated approach to the mechanics, it’s 2025.

Installation is not easy because of the flat bar for actuating the lock. The instructions are sorely lacking in this regard. One end of the bar has two "dimples" which must go into the combination side of the lock. There are 2 different lengths provide. I found that neither one worked for a 3.5" install and the longer one had to be cut. I cut it too short and did not have a working one because I inserted it the wrong way around. I ordered a replacement unit rather than try to get the part from tech support. Good thing I did too because the original one would not stay open fully, but "rebounded" about .5 inch not allowing the gate to close fully. However once I replaced the combo side3 of the lock with the new unit, it worked. I also rebuild my gate with 2x6s laid with the 1.5" side to mount the lock so that was room for the mechanism without having to add a block.