Recensioni dei clienti per VEVOR Piegatubi Manuale, 6,35 mm 9,5 mm 12,7 mm di Diametro Esterno, Piegatubi a Leva, Utensile per Piegare Tubi in Rame e Alluminio a 180° per Riparazioni Automobilistiche, HVAC e Aria Condizionata

bisschen unhandlich, aber nach kurzer Eingewöhnung und Probebiegung konnte ich die Klimaleitungen alle perfekt biegen- fast schon zu massiv für 1/4" Kupferleitungen und etwas knifflig das Ganze einzufädeln.

I bought this to bend 1/2" hvac tube. The first practice bend was good, the second through fifth were all kinked! After many more attempts I was able to make 4 double bends with reasonable success. On to my hvac lines... the first bend was going well until about 60 degrees, then it started to kink. I was able to salvage the kink and finish the bend. The second 90 worked OK but had a few larger puckers on the inside. To be honest, the radius of the tool is too tight for 1/2" for consistent success. My best guess is add another inch to the tool and it would be excellent! Now after saying that, the 50' tubing kit that I bought from Vevor was less maliable than the tubing that came with my mini-split AC, and that could be part of the problem. I found that going slow and stopping with less pressure about every 10* seemed to help. The bender is an absolute champ on 1/4" and worked well on a few 3/8" bends I tried.

Ce n'est pas à ce que je m'attendais. Très déçu !

DOES NOTFIT FOR 1/2 INCORECT DISCRIPTION !