Recensioni dei clienti per VEVOR Forche per Pallet Lunghezza 149cm Capacità Carico Max. 907kg, Coppia di Forche per Movimentazione Carico per Benne Trattori Minipala Escavatori in Acciaio, Forche per Benne Rimovibili per Carico

Over all I like these forks. After several times using them, there’s something I would change with the clamps. You have to use a cheater bar to get them tight and the threaded rods that’s bent over as a handle interfere with each other. The solution I’m going to implement is cut off the bend on the rod and weld a large nut to the to the top. Then a wrench or socket could be used to tighten each rod. Otherwise I’m very happy with them

Works good, but 1 fell off during operation when backing out of pallet. Othwlerwise I am happy with them.

Took a while to arrive but it travelled quite a distance, kudos !! Great implement addition for my small estate tractor. Completely adequate and adaptable for different tasks. No issues. Good buy. Thank you Vevor!

Well made - I use it on my mini stand on skid steer loader to move cut brush to my burn pile - My only complaint is the screw down locking bolt end does not swivel so it is hard to get it tight - I resolved the problem by making my own swivel foot - The price is fantastic and I would not hesitate to recommend it

These forks work great, were easy to install and did the job well. Good Deal at a Great Price. I use thgem 4 to 5 time qa week to move pallets and equipment around and into storage for winter.

Good but the clasps that hold need to be better,they loosen up and if over tighten break.need to be grade 8

Lifted my load great. Cross member broke, allowing the forks to move. Screw down bolts need to be separated more, so they don't hit each other or change to a large bolt head.

I always get things shipped quickly from Vevor. The quality of these clamp on forks is extremely good, thick metal and good welds. The only thing I would recommend is to spend a bit more and get the 60”. These seem just a bit short.

Read description carefully forks do not have a 60 working length seem to be holding up ok didn't fit my bucket verry New bucket cutting edge. Is to thin for the front of the forks to clamp on tight

Does the light lifting to off load deliveries that I needed. Can't ask for more. Easy to attach and connecting arm keep forks aligned