Recensioni dei clienti per VEVOR Forche per Pallet Lunghezza 149cm Capacità Carico Max. 907kg, Coppia di Forche per Movimentazione Carico per Benne Trattori Minipala Escavatori in Acciaio, Forche per Benne Rimovibili per Carico

Man I was hoping these would be a big help. Instead, they loosen up and shift even with the crossbar attached. They will not stay put, and no matter what we do, they shift while moving pallets. We have to get off the tractor and fix it several times in a very short period. I have just resorted to pushing teh pallets with the bucket after taking teh forks off since they are more a pain in the butt than helpful at all. And don't even try them if you have a toothbar attached. Makes them even more of a pin in the butt. The support plate does nothing but give them more area to slide on.

Doesn't clamp well, loosens and falls off overtime. Very weak course threading used. Stabilizer bar arrived cracked. Product support tried to say a crack was a weld. After I told them they are retarded they agreed to send replacement.

Not actually 43" forks. Only 30" of usable fork. Should be described as 30" forks. Returning these and ordering the bigger ones.

Price is low but they are a little flimsy and very difficult to get to them to hold properly. Get what you pay for I guess. Overall just ok

I’m disappointed in a few ways. 1.should have bought longer ones so they support the whole pallet. 2. The end of the bolts that clamp it on should have ends like G clamps that turn so you can tighten them down properly . Other than that they are built strong

Unusable as received (see attached picture), will have to either buy pin that can get screwed on existing plate or add a second so the provided pin go through first plate, then tractor lower arm then second plate.

I purchased four of these Hi-Lo Forks one-headed damaged box when I opened it one was caved in like they hit it with a high low it is no good to me I'm trying to get my $69 returned to the original payment please help thank you Randy

1/2 The Hardware is missing. This 4,000 lb model required 4 of the big clamping bolts with nuts. The 2,000 lb model required 2. The box was in good condition so they didn't fall out. The manufacturer didn't put them in the box , or I was sent the wrong item. I checked today for these 3/4 in diameter bolts and nuts found some not rated the 8.8 hardness and there over $21.00 each. What the heck. Seen another review saying the same thing buy the name Richard Waldrop.

Used these to lift some stumps into my backhoe bucket. First stump was around 400 lbs and the forks didn't stay straight even though I tightened them with a mini sledge but they did lift the stump. Second larger stump was around 600-700 pounds and the forks couldn't handle it. Both forks bent and broke. There is no way these things could handle anywhere near 4000lbs. Totally disappointed. While I figured they might not do what they said they would, I was hoping they would be able to handle at least half the rated weight. Save your money and buy something better.

Unfortunately these forks were damaged after the first time using just trying to pick up a small dead tree. Tree was less than 2000 lbs. Forks can still be used they are just no longer level. Looks to have cracked where welds were thin along side support bracket.