Recensioni dei clienti per VEVOR Forche per Pallet Lunghezza 149cm Capacità Carico Max. 907 kg Larghezza Regolabile tra 495 - 915 mm, Coppia di Forche per Movimentazione Carico da Benne Trattori Minipala Escavatori in Acciaio

Do not like them. They are not easy to keep in place on your tractor bucket. You really need to use channel locks or another tool to tighten down the L bolts. The Yellow plates that your supposed to place between the tractor bucket and the bolt, moves around to easily which makes it move out of position when tightening down. When I get enough money saved I would just buy the quick attach pallet forks. I have bought a lot of items from VEVOR and have had great success with them, but this is one I WOULD NOT BUY Again or recommend

Was moving rafters and some how bent one of the blocks that tighten it down with my 35 hp tractor

I was disappointed when I got these. The pads used for the mounting screws are just nuts loosely threaded on. When you go to tighten them, the nuts spin on the screw and will move up. When you loosen, the nuts fall right off. Very cheap design. If you are putting the forks on one time and leaving them, it would be okay. But if you are constantly taking them on and off, it is a big deal.

I did t rate it hi because its not strong enough for my use. If you're just going to make straight pics its fine but it twists easily and comes apart easy. I will find a stronger one. I wasted my money on this one

These are not 60 in Long there 42 inches long. If you need them to be 60 in long do not buy them. Once you have them there's no way to return them without paying more money and shipping then you paid for the dumb things. So I'm stuck with forks that don't work for the intended purposes that I purchased them for.

Verry dissatisfied as it has not held up and I have had to constantly straighten and reinforce to just get by, am looking for alternative.

I tried these forks on the bucket of my tractor. They were very hard to tighten and grab the Steele of the bucket. Once tight, they became loose again.

I would not recommend these. The the bolts are soft and had my first use. They actually bent. Those need to be re-engineered with something stronger. Really can't use them for pallet work. They just don't have the ability to stay on the bucket good enough for any amount of weight, but that's significant. Now they are handy for hand stacking things like 2x4s, small logs etc. But in no way replacement for actual pallet forks to be used as a tractor

Very bad. Weld failed using it once!

The 3 point hitch pallet fork might actually work well, but I wouldn’t know because the box was so destroyed by ups when I received it that all the hardware pins were missing. I’m sure they are rolling around in the back of an ups truck somewhere, but that doesn’t do me any good. I’ve contacted VEVOR twice about this and was told both times someone would contact me within 24 hours, but I have yet to hear from anyone.