Recensioni dei clienti per VEVOR Forche per Pallet Lunghezza 109cm Capacità Carico Max. 907kg, Coppia di Forche per Movimentazione Carico per Benne Trattori Minipala Escavatori in Acciaio, Forche per Benne Rimovibili per Carico

These forks work great. Would only add locking nut on the bolts.

Great idea, easy to use and to remove and reinstall. I dislike how easy it is to knock out of alignment.

Great value for the price. Hard to beat. Works pretty decent. I wish they were longer but understand why they can't for the weight rating. Nothing clamps into a bucket great, but these do ok. Wish I had gotten the version that had a connecting cross bar.

It’s a relatively cheap add on and works pretty good for the price I’ve used it a few times and is of good quality

I got this to move light stuff like brush and firewood. If you have a tractor with a loader, you need a set of forks!

Fit well to tractor bucket. Only issue was one of the clamping nuts was loose on the clamp bolt. Work well otherwise.

As an Engineer I am critical of things, but here is a honest review of this product. It works and functions, I would not try to lift 2000 lbs with this, the material is simply not there, nor is the footprint on the tractor bucket to support such a load. Most tractor buckets are simply not designed to handle that load within the small space that the forks are in contact with the bucket itself. I would image it would damage or at least bend the bucket. Don't get it wrong for moving around stuff that is light weight but more than 2 people can handle this is a easy product to utilize. For Design purposes, the threaded attachment needs to be fine thread instead of coarse thread and it would help to have a better base on the securing "washer/nut"(it tends to walk around while either tightening it or losing it) A lock nut would also be a great idea to incorporate as well.

Forks are built good for the rated weight they can handle. Easy to put onto bucket. The hold down bolt is weak and bends easily and one of the bottom nuts fell off on mine while loosing the bolt from the bucket, the lock tight used to keep it on broke loose allowing the nut to unscrew from the bolt. I drilled a hole through the nut and bolt and installed a roll pin to fix it. Works great now

Everything is good I just wish the screws to hold them in place had something where you can use a wrench to get it tight other than that great product.

Well made - I use it on my mini stand on skid steer loader to move cut brush to my burn pile - My only complaint is the screw down locking bolt end does not swivel so it is hard to get it tight - I resolved the problem by making my own swivel foot - The price is fantastic and I would not hesitate to recommend it