Recensioni dei clienti per VEVOR Forche per Pallet Lunghezza 109cm Capacità Carico Max. 907 kg Larghezza Regolabile tra 495 - 915 mm, Coppia di Forche per Movimentazione Carico da Benne Trattori Minipala Escavatori in Acciaio

Le produit va trés bien. La seul chose que j'aime plus ou moins, c'est la vis pour tenir les fourches, ça demande une bonne force humain pour bien la serré, Un boulon serait peut-être mieux pour la visser avec une visseuse a percusion ou un ratchet. Et le bout de la vis s'endommage donc on ne peux plus la dévisser complètement.

OK for light job. The plate for mount are to tin and are easy moving and i lost it

The forks came the box was destroyed all taped up no screw clamps waited till now to say anything couldn't find a contact to complain earlier and no directions to keep it on the loader

Forks are good but it was missing the bolts to hold them on. It would be nice if you could ship me just the bolts out. And I would be really happy with it the box was not in good shape I'm assuming whatever held it on was in with that nothing there but just the forks

For the price they seem good. The problem it the cardboard box they came in had a big @$$ holevin the side. And because of that the 4 locking screws fell out or were taken out. They apparently are Not Secured in any way to the forks. Email them the problem with photos. And after what I'm assuming is just a bunch of different AI generated names and contacts I was told they can't or won't send me the screw bolts. Gave me a $39 refund. But that's not fixing the problem. Now I have to figure out the size and order them on line. As NoOne around here carries anything that large. And at the price of Hardware & shipping it's probably going to cost my more than they refunded me. So definitely not happy with customer service. This apparently happens to a lot of people getting these. So don't be surprised if it happens to you. Oh and they already getting surface rust in spots the shouldn't. In just 20 days outside up against shed wall under overhang. And I haven't even used them yet. Sooo Best of luck to whoever reads this.

Just what I ordered! My only problem is that I can't pick up much weight with them on my kubota tractor as it puts weight too far forward. I've added some weight to the rear which helped but I need to figure out how to safely add more and what the limits are. They're great for picking up brush & branches, and I've used to pick up a small rider mower to work on it.

Except for one little annoying design fault - for me - this lift is great. The fault? I'm using this on my antique 1952 Ford 8N tractor. I think the 3 point lift is very standard and similar to virtually all othe small tractors. The problem is that the pins are placed too low to the ground. Thus, I can not set the unit all the way down to the ground to pick up a pallet. Other than that, it is wonderful and very strong. I've already lifted and carried a big load of firewood. The cure? A little simple welding project. I'm just adding a pin position a little higher so I can get right down on the ground. For me, on a farm with a farm shop, this is easy. For others, a quick trip to a welding shop would do it. It is light enough you can manage to move it by hand. Other than this one design issue, I love it.

Used mainly for logs and resulting slash. Worked perfectly.

Schweißnaht nicht perfekt

Priced several different brands, liked the price and the way they looked when they arrived. Time will tell if they hold up as expected.