Recensioni dei clienti per VEVOR Forche per Pallet Lunghezza 109cm Capacità Carico Max. 907 kg Larghezza Regolabile tra 495 - 915 mm, Coppia di Forche per Movimentazione Carico da Benne Trattori Minipala Escavatori in Acciaio

Great forks!

Right out of box and straight to work.. works well and built good.

Plenty heavy but the J bolts are no good. They are too close together to tighten. I changed mine to hex bolts so I can tighten them with an impact. I also welded nuts in the bucket to give them a pocket to go into to stop them from moving.

I needed forks for my John Deere utility tractor, so I bought these. Shipping was fast, and they arrived undamaged. They slip on over the cutting edge on most buckets. My tractor cannot lift no where near the 2,000 lbs these are rated at. For pallets, they work pretty good. Since they are a bit thicker than a regular fork, it is a little bit of a challenge to work them into a pallet. Since nothing keeps them moving back and forth, you might need to reposition them. They will lift a pallet and do a pretty good job of it. As far as lifting items that are not a pallet, it can get pretty interesting. I was moving some jet skis that where sitting on old tires. Since the hull is not flat, it took a couple of tries to find a spot where forks would not spread as drove around. If the object has a flat bottom, you shouldn't have this problem. Since the weight is cantilevered so far out of front of the tractor, you will likely be able to lift less than your rated capacity. Would I recommend these, yes but understand there limitations and they are not really meant for everyday use. If you just need to unload a truck once awhile or move a pallet around they should work for you. I would definitely look into a stabilizer bar, ideally an adjustable one you can move forks closer together for those small pallets.

Le produit va trés bien. La seul chose que j'aime plus ou moins, c'est la vis pour tenir les fourches, ça demande une bonne force humain pour bien la serré, Un boulon serait peut-être mieux pour la visser avec une visseuse a percusion ou un ratchet. Et le bout de la vis s'endommage donc on ne peux plus la dévisser complètement.

OK for light job. The plate for mount are to tin and are easy moving and i lost it

The forks came the box was destroyed all taped up no screw clamps waited till now to say anything couldn't find a contact to complain earlier and no directions to keep it on the loader

Forks are good but it was missing the bolts to hold them on. It would be nice if you could ship me just the bolts out. And I would be really happy with it the box was not in good shape I'm assuming whatever held it on was in with that nothing there but just the forks

For the price they seem good. The problem it the cardboard box they came in had a big @$$ holevin the side. And because of that the 4 locking screws fell out or were taken out. They apparently are Not Secured in any way to the forks. Email them the problem with photos. And after what I'm assuming is just a bunch of different AI generated names and contacts I was told they can't or won't send me the screw bolts. Gave me a $39 refund. But that's not fixing the problem. Now I have to figure out the size and order them on line. As NoOne around here carries anything that large. And at the price of Hardware & shipping it's probably going to cost my more than they refunded me. So definitely not happy with customer service. This apparently happens to a lot of people getting these. So don't be surprised if it happens to you. Oh and they already getting surface rust in spots the shouldn't. In just 20 days outside up against shed wall under overhang. And I haven't even used them yet. Sooo Best of luck to whoever reads this.

Just what I ordered! My only problem is that I can't pick up much weight with them on my kubota tractor as it puts weight too far forward. I've added some weight to the rear which helped but I need to figure out how to safely add more and what the limits are. They're great for picking up brush & branches, and I've used to pick up a small rider mower to work on it.