Recensioni dei clienti per VEVOR Forche per Pallet Lunghezza 109cm Capacità Carico Max. 907 kg Larghezza Regolabile tra 495 - 915 mm, Coppia di Forche per Movimentazione Carico da Benne Trattori Minipala Escavatori in Acciaio

Work great wish I had ordered the longer ones we put them on the bucket of the Kabota tractor but you can’t see them from the seat so if you go to get a set, do yourself a favor and buy the longer ones and get the center support brace it’s a must have.

Great product! I love the clamp-on forks. They work especially well if you pair them with chains to give additional support which allows the forks to last much longer!

These forks work really well. I have used them to move several things already from light to heavy stuff and they have worked flawlessly.

They clamped right on and have been extremely helpful to have and make jobs easier

I got these for my MF GC1725 and they work great! So far I’ve used them to pick up piles of brush and vines to place on a bonfire. Worked great!

Excellent product. Does what it should. Delivery on time and quality product. Strongly recommend for anyone requiring a quick solution to afix to a tractor bucket.

work great on our little kuboto.......................................................................................................................................................................................

They’re ok for light duty work. It’s all a bit wobbly even with the cross brace but again it’s for light duty work. All in all I’m pretty happy with it. The price is good.

I purchased this pallet Fork Lift and the middle rod has bent, why I don't know. I use it to lift limbs and it supposed to support up to 2000lbs but the middle bar bent. However you decide to handle this is fine with me. Sorry I could only download 2mb of the pic part of the picture

The forks are strong and fit over the lip of the tractor bucker well - their is a minor manufacturing flaw and a design flaw: One of the tightening bolts threaded connector to the fork is welded incorrectly causing the side of the bolt to rub against the side of the fork bolt chase see image). The fork screw -down clamp bolts look like they are supposed to have flat contact surface that 'should' allow the bolt to tighten without causing the round contact surface to 'walk' on the bucket. This is a problem and a better contact point could easily be designed that would not walk on the bucket surface (a design that would allow the bolt to tighten without the contact surface turning with it). However, with that said, I greased the bolt into the nut/contact surface and left the bolt about 3/8 inch; from the contact plate which allows for the contact surface to better seat while tightening down the bolt - the contact surface still walks on the bucket, but not as much.