Recensioni dei clienti per VEVOR Compressore d'Aria 8L Portatile Senza Olio Motore 900W Velocità 2800 giri/min per Aerografo Inchiodatura, Compressore d'Aria a Secco Portatile Rumore 70dB 2 Silenziatori Temperatura -50℃ - 40℃

Item arrived in excellent condition. Made from quality materials and works perfectly.

Works good. Doesn't like extension cords or start capacitor seems undersized.

Compressore bellissimo ,facile da trasportare ovunque ,molto maneggevole .Va benissimo per piccoli lavori saltuari.

Felt compelled to leave a review for this tiny soldier! By default the compressor was set to 90 psi which is pretty damn weak. I've been driving it for a month now at 150 psi supplying a larger seven gallon pony tank to drive some light presses. Outstanding! it has never tripped the breaker and seems to run very happy at the increased load. all you need to do is swap out the stock blowoff valve for a 150 psi unit, when you take the plastic casing off there is a convenient psi adjustment screw, turning clockwise to increase the target pressure. I'm pretty sure you could go higher than 150 but 150 is where I feel safe, most pancake compressors can do 150 no problem. Pro tip: for whatever reason they use thread lock red to secure their fittings on this compressor, super annoying. you will need to heated up with a torch to an thread the stock valve. The stock regulator has no problems running 150 psi to the pony tank.

Tutto bene

Ottimo prodotto lo consiglio, io ho preso sia il piccolino da 8L e sia il 35L e sono fantastici👍🏻👍🏻👍🏻

Compressore leggero silenzioso e potente

Ero un po scettico per via della capacità del compressore ma usandolo mi sono reso conto che è un ottimo compressore, leggero, silenzioso e facile da usare, lo consiglio vivamente a chi ha bisogno di un ottimo compressore ma di piccole dimensioni

Compressore di buona qualità. Pratico e funzionale soddisfa tutti i lavori di tipo semiprofessionale. Oltre all'aspetto molto bello è compatto e facile da trasportare. Silenzioso e potente. Consiglio senza dubbi.

I recently purchased a pneumatic aluminum can crusher so I could recycle aluminum. I needed a small air compressor to use for the can crusher. However, I wanted a compressor that output "dry" air. So, I made a few modifications. I added a 12-foot long, 1/4" coiled copper tube from the compressor head that feeds into a 4-row transmission oil cooler. On the face of the transmission cooler, I mounted a 120mm cooling fan, wired directly into the compressor's pressure switch. The cooling fan pulls air through the oil cooler fins and condenses any moisture in the system. From the transmission cooler, the air then travels into two 5-micron air filters, where any condensed moisture is trapped and later drained. From those air filters the "dry" air travels to the 1-gallon holding tank. By the time the compressed air reaches the holding tank, it is very dry. There is almost zero condensation moisture in that compressed air when it hits the holding tank. I then plug the air hose to the can crusher into the outlet and crush cans. With very dry air going through the system, the whole system should last a very long time, as well as the can crusher! This setup works perfectly. I am very pleased with this little air compressor! Obviously, I completely voided an warranty, which is OK.