Recensioni dei clienti per VEVOR Carrello Rimorchio per Carichi Pesanti in Acciaio, Cassone di Trasporto da Giardino con Lati Rimovibili Portata max. 340kg ca. Carrello per Trattore Tosaerba con Ruote per Trasporto da Giardino

Price and tilt feature were the two things that attracted me to this trailer. However, quality is mediocre. Parts were damaged and dented. This made it very difficult to assemble. I have been using it and hope I'll lasts.

I bought this for pulling through the trails with an ATV on my property for cleaning up debris from downed trees, moving dirt around, things like that. It works ok, but it really could use more pins or bolts to attach the side rails - they tend to pop off too easily. I may end up adding some myself. Also, the pins that do come with it to hold the front and end gate on are too short - as things flex over rough terrain, the pins just pop open and fall out. The dump mechanism is almost useless. It pivots at the axle, so it can only tilt a small amount, not really enough to "dump" anything. The actual trailer seems solid enough for what it is, and I think it will hold up to my planned usage, I was just expecting better.

Arrived damaged. Had to use my own hardware to assemble as the package of hardware was broken and many pieces missing. Had to do some fabrication work because the neck was bent Cust service didnt respond in any tangible way

Nice trailer I bought 2 , bent wheel on one no way to order another wheel and tire that I could find , that’s why not a better review.

I don't see this cart lasting for more than a couple yesrs

Pretty easy assembly, the support brace that lockes into dump handle doesn’t fit right. When weight is in bed it will come loose and dump, I am going to have to weld some metal in groove to extend into the lock handle more but should fix the problem. Besides this faulty part the quality for the price is good.

The good: Looks good, performed well in first test carrying firewood behind the ATV. Price seems reasonable. The bad: Connecting rod A will not slide into connecting rod B due to excess glob of metal on inside of rod B. Removal of excess material was difficult but I was able to eventually connect these parts. Axel (4) will not fit into the 2 fixed plates (3's) unless paint is removed from each end of the Axel and the inside of the fixed plate holes. Irritating, but fixable. First wheel went on fine, but second wheel plus the two washers did not allow enough room to insert the cotter pin. I had the shave down the edge of one of the washers which was a pain, and introduce a slight bend to the cotter pin using a hammer. It finally fit but does not turn freely like the other wheel. The trailer release assembly on connecting rod B seems very cheap and did not initially engage, but I was finally able to get it to lock and am hopeful it won't fail. Connecting rod B was dented and bent in shipping, but I won't hold that against Vevor and am hopeful I will be able to find a customer service number and they will send a replacement part. It was very frustrating to build with the 3 big quality/tolerance issues above. But once built it seems like a pretty nice product.

Assez satisfait de cette remorque, fait le job à merveille mais je ne suis convaincu de la qualité de l'acier, rouille très vite, peinture pas top

This has been a great little ATV trailer for the few months that I've had it. I've moved a few cored of firewood with no major issues. It was easy to assume, has held up the the abuse I've put it through in the forest hauling firewood and still works as required. My only complaint is how the removal sides are attached. There is nothing actually attaching the sides to the trailer. Only quick pins holding the sides to each other. Pretty much constantly when I was running the trailer empty the sides would either vibrate out or the quick pins would get caught on branches and get lost it was a constant fight to keep the sides in place. Because I don't plan to use the trailer with the sides attached I ended up drilling extra holes to bolt the sides to the main body of the trailer. I would recommend changing the location of the current quick pins or adding extra pins for future models. If it wasn't for this one complaint I think this trailer would be 5 stars. Even with this issue it is amazing value for the product. Would definitely buy another one.

Ok so I bought this in hopes to be able to use the dump feature of this trailer. Needless to say it definitely does not work well for that. If it was a few inches higher or the pivot point of the bed and frame where back a bit more I do believe it would work so much better. The downside of moving the pivot point back though could possibly make for more of a chance to possibly bend the frame so would need better materials to be used.